Round and Oval Drive Punches
Round Drive Punches are used to punch round holes in leather. These punches are all sharp and ready to use. They are a mix of makers - Osborne, Bemis&Call, VBT, KeenKutter, etc. unless otherwise noted in the descriptions.
Buttonhole punches cut a round hole and connected slit/Pippin punches have a elongated teardrop hole and connected slit. They are used for buttons or stud fasteners. Button hole punches may be a pliers type tool or a drive punch. Oval punches are something I rarely get. They cut an elongated hole and good for strap holes to let the buckle tongue sit a little more flush.
Arch style round punches are generally larger size round hole punches. Most are going to be Osborne, but there are a few other makers represented at times - Adco, ASF&T, Wm Johnson, Krauter.
New Oval Drive Punches






Refurbished Oval Punches








New Round Drive Punch Sets
The CS Osborne K245 set has 6 commonly used drive punches. The sizes are #2 (1/8"), #4 (5/32"), #6 (3/16"), #9 (1/4"), #12 (5/16"), and #14 (3/8"). They come with the included pouch for a travel kit or easy storage. I have sharpened these punches and they are ready to use.
The larger size version of the drive punch sets is the CS Osborne K245L set of drive punches we are stocking. The sizes are 1/2', 9/16", 5/8", 3/4", 7/8" and 1 inch. They come with a canvas pouch and have been sharpened - bench ready.
The K-156 round punch set from CS Osborne is a centering punch set. The handle has a spring loaded retracting center point for registration and the punch tips screw on. The tips go from 1/4 inch through 1 inch. Tips have all been sharpened and includes a hard plastic storage case.



New Round Drive Punches










Refurbished Round Drive Punches









Round Arch Punches










